The video is a CEREC case study using Copy & Mirror workflow for a single central veneer. The primary objective for this case is to brighten the tooth value using a conservative veneer to match the adjacent central. Treating a single center is the ultimate aesthetic opportunity. This video will discuss preparation, ceramic choices, and cementation strategies.
Submitted by James Klim DDS, CADStar Host on 12/28/2020 - 8:35pm
Categories:
Submitted by James Klim DDS, CADStar Host on 12/13/2020 - 4:40pm
Categories:
This video highlights my incisal edge workflow using MiYO. There are several advantages to MiYO over other coloring stain and glaze systems. First of all, the lower values, high values, and color applications can be accomplished with one application and firing. Second, what is observed in the application wet stage will be seen in the post-firing condition. Though MiYO has many characterizing and color applications, this video will deal with the color incisal edge strategy setup and color application sequencing. Link to the following video for MiYO mixing and
Submitted by James Klim DDS, CADStar Host on 12/06/2020 - 2:48pm
Categories:
There are a plethora of ceramic finishing videos on this website. This video will document my workflow for shaping and texturing an eight-unit anterior case. In this case, Amber Mill, by HASS Bio, is being used. I have discovered that each ceramic such as VITA felspathic, Empress, e.max, Suprinity, or Amber Mill have their own characteristics on how the surface and texturing applications turn out. However, the workflow and principles of shaping and texturing are the same.
Submitted by James Klim DDS, CADStar Host on 11/16/2020 - 9:45pm
Categories:
Fabricating and using a Sil-Tech aesthetic jig is a predictable asset for aesthetic mock-ups. This video will review applications for a prototype before and during an anterior smile treatment and then the fabrication process for a mock-up Sil-tech jib.
Submitted by James Klim DDS, CADStar Host on 11/08/2020 - 10:59am
Categories:
This video documents my workflow for scanning in veneers with Primescan. This technique works well for Omnicam users, however, a light mist of Optispray will be needed to define the interproximal margin zone when using Omnicam. Primescan has solved so many scanning issues of its predecessors (Omnicam and Bluecam). Primescan is definitely a dream and captures thin enamel margins and undercuts to provide well-defined images and clean margins.
Submitted by James Klim DDS, CADStar Host on 10/22/2020 - 9:11am
Categories:
Primescan has opened up my clinical theater for complete digital scans. This video is about the journey of denture duplication for master impression and tooth set up. Please post your questions and comments.
Submitted by James Klim DDS, CADStar Host on 10/16/2020 - 12:19pm
Categories:
This video highlights my anterior prepping workflow for full crowns and scanning with the Primescan. This approach works well for Omnicam as well. The bur kit being used is by Meisinger (JK02). The white stone used for finishing is from Meisinger as well, but not on the prep kit. Please post questions or comments.
Submitted by James Klim DDS, CADStar Host on 10/09/2020 - 2:40pm
Categories:
There are four primary software proposing options for anterior designs--BioCopy, Copy & Mirror, Biogeneric, and BioJaw. All these proposal workflows have their place. This video tutorial will review my Biogeneric workflow for multiple anterior teeth. I still acquire a Biocopy catalog and activate this catalog to guide the placement of the anterior virtual restorations in the Design Phase screen.
Submitted by James Klim DDS, CADStar Host on 10/01/2020 - 9:53pm
Categories:
Submitted by James Klim DDS, CADStar Host on 09/14/2020 - 7:36pm
Categories:
