Submitted by James Klim DDS, CADStar Host on 05/23/2019 - 6:24pm

Introduction overview video for a Klim Institute Online AGD CE lesson;  Shaping, texturing, and polishing techniques for the primary materials we use in CEREC (composite, Empress, VITA ceramic, e.max, and zirconia options).  This lesson is a compilation of videos that Dr. Klim presented at a recent AACD hands-on course.  Enjoy!  Start the 1.0 unit of CE lesson by clicking on the link below.

Submitted by James Klim DDS, CADStar Host on 03/04/2019 - 7:55am

This video shares my passion for why I love providing online CEREC education.  I have been so blessed by making a decision 15 years ago to integrate CEREC into my clinical theater.  Fast forward to the latest Primescan!  It is hard to believe how this restorative digital journey has evolved to now impacting a significant part of my daily clinical chairside care.

  • Restorative Restorations
  • Implant Placement (Crown Down Technique)
  • Implant Restorations
  • Bridges
  • Removable Appliances and Splints
  • Comprehensive Restorative Care
  • Restorative Implant Hybrid Prosthesis
  • Digital

Submitted by James Klim DDS, CADStar Host on 08/26/2018 - 9:50pm

I have had a number of inquiries from our online world audience about where are the 4.6 software videos.  4.6 has not been released in the US yet.  We will offer videos as soon as it is released in the US.  In the meantime, be cautious about uploading until we are assured the bugs are worked out.

Link for Members Video

Submitted by James Klim DDS, CADStar Host on 09/21/2017 - 10:37pm

Open Scan Export License (STL Export for Chairside Software

Can I export STL files from CEREC Chairside Software?

CEREC/Ortho/Sirona Connect - With the release of CEREC 4.5, Sirona Connect 4.5 and CEREC Ortho 1.2 softwares, Dentsply Sirona has also introduced an Open Scan Export License which enables users to export STL files from the chairside software.

Environment: CEREC Chairside 4.5 and higher/Sirona Connect 4.5 and higher/CEREC Ortho 1.2 and higher

Answer:

Chairside Software Versions which can export the Open Scan STL are listed below.  The applicable license must be activated on the License Drive

Submitted by James Klim DDS, CADStar Host on 08/31/2017 - 6:45am

The CEREC 4.51 software will be incredible once the hardware catches up with the software. The milling algorithms are the best I have seen since using this system.  The problem, unless you CEREC tower is fairly recent, the system is still crashing.  Consider this part of progress! View Video


Submitted by James Klim DDS, CADStar Host on 07/18/2017 - 10:15pm

The 4.5 software is here.  I love the upgraded margin clarity and refined mills.  However, the software does crash a bit.  Unless you have a recent computer tower,  you may need to upgrade to make this software work. Sorry!  However, this software is the closest I have seen in performance to 3.85 since introducing the 4.0 platform.  View my intro video.  There is a general overview for each section of the software in the 4.5 Software Channel.  More videos will be coming soon in the 4.5 Channel.   View 4.5 Overview Video

Submitted by James Klim DDS, CADStar Host on 07/18/2017 - 9:32pm

Categories:

We have been working on our updated website platform for the last 6 months.  We are looking forward to adding allot of new content and online CE options.  As we observe the performance of our new platform, I am sure there will be a few areas to tweak.  That is part of our upgrade journey.  We look forward to the future and many new adventures and learning options for you online.   Thank you to Jenny Nolan at the Klim Institute for overseeing and orchestrating the new site.   James Klim DDS, FAGD, AAACD

Submitted by James Klim DDS, CADStar Host on 09/08/2016 - 7:51am

Dentsply/Sirona is setting the bar for comprehensive digital dentistry, impacting all the disciplines in dentistry and our daily clinical lives. 

Submitted by James Klim DDS, CADStar Host on 08/21/2016 - 10:34am

Enjoyed speaking on one of the Siroworld panels on how to choose ceramic materials.

Submitted by James Klim DDS, CADStar Host on 03/22/2016 - 8:35am

New layout in the Administrative Screen for 4.4 implant restorative applications.  Most important talking point setting up for an implant restoration is always choose